How2: Set the rolling code on the CentiumDFX Alarm & Receiver
It is so easy to set the rolling code on the new CentiumDFX Wireless Alarm & Receiver.
Array
(
    [0] => Array
        (
            [0] => /hints_and_tips/how_to_use_products/212266449/how-to-set-the-rolling-code-on-the-centiumdfx-alarm-receiver
            [1] => 1382631300
            [2] => How2: Set the rolling code on the CentiumDFX Alarm & Receiver
            [3] => Array
                (
                    [0] => /media/content/138263096933415201394.jpg
                    [1] => 130
                )

            [4] => 
            [5] => It is so easy to set the rolling code on the new CentiumDFX Wireless Alarm & Receiver.
            [6] => Just follow the simple instructions below...
            [7] => Array
                (
                    [0] => /media/content/138263097089739601586.jpg
                    [1] => 160
                )

            [8] => Press down the 'code' button.
            [9] => Array
                (
                    [0] => /media/content/138263097032535911828.jpg
                    [1] => 160
                )

            [10] => While keeping the 'code' button pressed, switch the lever from the Off position to the 'S/On' position. All four LED will flash once.
            [11] => Array
                (
                    [0] => /media/content/138263097014115533131.jpg
                    [1] => 160
                )

            [12] => Press the 'code' button again to choose which colour LED you want to link to your alarm.
            [13] => Array
                (
                    [0] => /media/content/138263097030530421575.png
                    [1] => 160
                )

            [14] => Switch on the alarm and run the wheel as if a bite has occured, the receiver will acknowledge this with a noise. Once configured, switch the receiver to the Off position, then switch off your alarm. The rolling code link is now made and saved. Repeat sequence to set more alarms to the receiver/different LED colours.
            [15] => Array
                (
                    [0] => /media/content/138263097030834891876.jpg
                    [1] => 160
                )

            [16] => Switch the alarm on again and now switch the lever on the receiver to either the S/On position if you want sound, or the V/On position if you just want vibration. You are now ready to fish. 
            [17] => 
            [18] => 
            [19] => 
            [20] => 
            [21] => 
            [22] => 
            [23] => 
            [24] => 
            [25] => 
            [26] => 
        )

)
main picture
Just follow the simple instructions below...
  YOUR STEP BY STEP GUIDE
Press down the 'code' button.
spacer
Press down the 'code' button.
While keeping the 'code' button pressed, switch the lever from the Off position to the 'S/On' position. All four LED will flash once.
spacer
While keeping the 'code' button pressed, switch the lever from the Off position to the 'S/On' position. All four LED will flash once.
Press the 'code' button again to choose which colour LED you want to link to your alarm.
spacer
Press the 'code' button again to choose which colour LED you want to link to your alarm.
Switch on the alarm and run the wheel as if a bite has occured, the receiver will acknowledge this with a noise. Once configured, switch the receiver to the Off position, then switch off your alarm. The rolling code link is now made and saved. Repeat sequence to set more alarms to the receiver/different LED colours.
Switch on the alarm and run the wheel as if a bite has occured, the receiver will acknowledge this with a noise. Once configured, switch the receiver to the Off position, then switch off your alarm. The rolling code link is now made and saved. Repeat sequence to set more alarms to the receiver/different LED colours.
Switch the alarm on again and now switch the lever on the receiver to either the S/On position if you want sound, or the V/On position if you just want vibration. You are now ready to fish.
spacer
Switch the alarm on again and now switch the lever on the receiver to either the S/On position if you want sound, or the V/On position if you just want vibration. You are now ready to fish.